期刊論文一覽

	年度	著作
	2023	Thanh-Cong Nguyen, Dung Hoang Tien, Ba-Nghien Nguyen and Quang-Cherng Hsu*, 2023 (May), “Multi-Response Optimization of Milling Process of Hardened S50C Steel Using SVM-GA Based Method”, Metals, 2023, 13(5), 925; https://doi.org/10.3390/met13050925. (2022 JOURNAL IMPACT FACTOR: 2.9)
	2023	Lih-Ping Huang, Quang-Cherng Hsu*, Bao-Hsing Liu, Chin-Fu Lin and Chien-Hsianh Chen, 2023 (April), “Light Source Modules for Defect Detection on Highly Reflective Metallic Surfaces”, Metals, 2023, 13(5), 861; https://doi.org/10.3390/met13050861. (2022 JOURNAL IMPACT FACTOR: 2.9)
	2022	Jhan-Hong Ye, Rui-Hong Ni and Quang-Cherng Hsu*, 2022 (December), “Image feature analysis for magnetic particle inspection of forging defects,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Volume 236, Issue 14, Pages 1923-1929. (2022 JOURNAL IMPACT FACTOR: 2.6)( MOST 107-2622-8-110-005- SB2)
	2022	Anh-Tuan Dang, Quang-Cherng Hsu*, and Yu‑Sin Jhou, 2022 (March), " Development of human–robot cooperation for assembly using image processing techniques", International Journal of Advanced Manufacturing Technology, Vol. 120, pages3135–3154 (2022). (2022 JOURNAL IMPACT FACTOR: 3.4) (MOST 109–2813-C-992–080-E.)
	2021	Anh-Tuan Dang, Quang-Cherng Hsu*, and Tat-Tai Truong, 2021 (June), "A simple method for dimensional measurement of ring-shaped objects using image processing technique", International Journal of Advanced Manufacturing Technology, Vol.115 (11-12), pp.3657–3678, https://doi.org/10.1007/s00170-021-07416-5. (2020 JOURNAL IMPACT FACTOR: 3.226) (MOST 106-2622-E-151-017-CC3)
	2021	Yu-Liang Chen, Chia-Wei Tsai, Fan-Siou Ding, and Quang-Cherng Hsu*, 2021 (April), “Application of Line Scan Technology for Defect Inspection in Plain Dyed Fabric,” Sensors and Materials, Vol. 33, No. 12 (2021) 4087–4103. (2020 JOURNAL IMPACT FACTOR: 0.759).
	2021	Yung-Fu Hsieh, Jhan-Hong Ye, Nan-Jyue Wu, and Quang-Cherng Hsu, 2021 (March), “Intelligent Automatic Deburring System by Integrating Palletizing Robot with Image and Vibration Sensors”, Sensors and Materials, Vol. 33, No. 3 (2021) 933–945. (2020 JOURNAL IMPACT FACTOR: 0.759).
	2020	Tat-Tai Truong, Quang-Cherng Hsu, Van-Canh Tong and Jinn-Jong Sheu 2020(April), “A Design Approach of Porthole Die for Flow Balance in Extrusion of Complex Solid luminum Heatsink Profile with Large Variable Wall Thickness,” Metals, 2020, 10(5), 553; doi:10.3390/met10050553, (SCIE, 2018 Impact Factor:2.259). (MOST 108-2221-E-992-066-)
	2020	Tat-Tai Truong, Quang-Cherng Hsu and Van-Canh Tong, 2020, “Effects of Solid Die Types in Complex and Large-Scale Aluminum Profile Extrusion,” Applied Sciences-BASEL, 2020, 10, 263; doi:10.3390/app10010263, (SCIE, 2018 Impact Factor:2.217). (MOST 108-2221-E-992-066-)
	2020	Quang-Cherng Hsu, Rui-Hong Ni, Jhan-Hong Ye and Ngoc-Vu Ngo, 2020, “Automatic Optical Inspection for Magnetic Particle Detection of Forging Defects”, Advances in Engineering Research and Application, Proceedings of the International Conference on Engineering Research and Applications, ICERA 2019, LNNS (Lecture Notes in Networks and Systems), Vol. 104, pp. 144–154, Springer Nature Switzerland AG 2020. (MOST 107-2622-8-110-005-SB2)
	2019	Ngoc-Vu Ngo, Glen Andrew Porter and Quang-Cherng Hsu, 2019 (December), “Development of a Color Object Classification and Measurement System Using Machine Vision,” Sensors and Materials, Vol. 31, No. 12, pp. 4135–4154. (SCIE, 2018 Impact Factor: 0.468)
	2019	Quang-Cherng Hsu, Ngoc-Vu Ngo and Rui-Hong Ni, 2019 (February), “Development of a faster classification system for metal parts using machine vision under different lighting environments,” International Journal of Advanced Manufacturing Technology (ISSN 0268-3768), Vol. 100, No. 9-12, pp. 3219-3235 (SCI, 2017 Impact Factor:2.601).
	2018	Jhan-Hong Ye and Quang-Cherng Hsu*, 2018 (November), “Automatic Optical Apparatus for Inspecting Bearing Assembly Defects,” Sensors and Materials, Vol. 30, No. 11 (2018) 2637–2652. ISSN 0914-4935, https://doi.org/10.18494/SAM.2018.2113. (SCI, 2017 Impact Factor:0.482)
	2018	Quang-Cherng Hsu, Ngoc-Vu Ngo and Rui-Hong Ni, 2018 (October), “Development of a faster classification system for metal parts using machine vision under different lighting environments,” International Journal of Advanced Manufacturing Technology (ISSN 0268-3768). (Int J Adv Manuf Technol, DOI 10.1007/s00170-018-2888-7, Received: 26 June 2018 /Accepted: 12 October 2018, Published online 10.29.2018.) (SCI, 2017 Impact Factor:2.601) link to this paper: 2.601. Print in completed version (2019), 100(9), pp.3219-3235.
	2017	Anh-Tuan Do, Kuo-Wei Lee, Wen-Hao Chang, Rung-Ye Lin and Quang-Cherng Hsu, 2017 (October), “Three-Dimensional Measurement of Spring Back Characteristics for Helical Plastic Hoses by Computer Vision,” Computational Methods and Experimental Measurements XVIII, WIT Transactions on Engineering Sciences, Volume 118, pp. 115-126, ISSN: 1743-3533.
	2017	Ngoc-Vu Ngo, Quang-Cherng Hsu, Wei-Lin Hsiao and Chang-Jui Yang, 2017 (October), “Development of a simple three-dimensional machine-vision measurement system for in-process mechanical parts,” Advances in Mechanical Engineering, Vol.9, No.10, pp 1-11. ISSN: 1687-8140 (SCI, IF:0.827)
	2017	T. V. Do, Quang-Cherng Hsu, Wei-Lin Chen and Ying-Lun Jian, 2017 (October), "Improving Forgings Formability by Warm Complexing Processes", Solid State Phenomena, Vol. 266, pp. 24-29. ISSN: 1662-9779 (EI).
	2017	Huu-That Nguyen and Quang-Cherng Hsu, 2017 (March), “Study on Cutting Forces and Material Removal Rate in Hard Milling of SKD 61 Alloy Steel,” Journal of the Chinese Society of Mechanical Engineers, Vol.38, No.1, pp 41~51. ISSN:0257-9731 (SCI, IF:0.274)
	2016	The-Vinh Do, Quang-Cherng Hsu, Po-Hung Chen and Yu-Liang Chen, 2016 (September), “Study on the Performance of Orthodontic Self-Drilling Correction Screw of Ti6Al4V and Stainless 316L”, Materials Science Forum, ISSN: 1662-9752, Vol. 872, pp 276-280. (EI)
	2016	Huu-That Nguyen and Quang-Cherng Hsu, 2016 (June), “Surface Roughness Analysis in the Hard Milling of JIS SKD61 Alloy Steel,” Applied Sciences (Appl. Sci., ISSN 2076-3417; CODEN: ASPCC7) 2016, 6(6), 172; doi:10.3390/app6060172. (SCI, I.F. 1.726).
	2016	B.H. Liu, Q.C. Hsu, C.D. Wu, 2016 (March), “Nanoextruded NbTi Superconductor Nanowires Investigated Using Molecular Dynamics Simulations”, Applied Physics A, 122(4), Article: 465; DOI 10.1007/s00339-016-0010-2. (NSC 102-2221-E-151-010-) (SCI, IF:1.444)
	2016	The-Vinh Do and Quang-Cherng Hsu, 2016 (March), “Optimization of Minimum Quantity Lubricant Conditions and Cutting Parameters in Hard Milling of AISI H13 Steel”, Applied Sciences (Appl. Sci., ISSN 2076-3417; CODEN: ASPCC7) 2016, 6(3), 83; doi: 10.3390/app6030083. (SCI, IF:1.726)
	2015	Q.C. Hsu and A.T. Do, 2015 (March), “Formation ability welding seams and mechanical properties of high strength alloy AA7075 when extrusion hollow square tube,” International Journal of Precision Engineering and Manufacturing, Volume 16, Issue 3, pp 557-566. ( NSC 100-2221-E-151-019-.) (SCI, Impact Factor:1.205)
	2015	Q.C. Hsu and Y.L. Chen, 2015 (January), “Fabrication of 3D random microlens array composite optical film with self-assembly,” International Journal of Advanced Manufacturing Technology (ISSN 0268-3768), Vol. 76, No. 1-4, pp. 247-254. (Int J Adv Manuf Technol, DOI 10.1007/s00170-014-6408-0, Received: 12 August 2013 /Accepted: 17 September 2014, Published online 10.2.2014.) (SCI, Impact Factor:1.458)
	2014	Q.C. Hsu, Y.L. Chen, and T.H. Lee, 2014(October), “Non-symmetric hollow extrusion of high strength 7075 aluminum alloy,” Procedia Engineering, 81, pp.622-627. ( NSC 101-2221-E-151-018-.)
	2014	B.H. Liu and Q.C. Hsu, 2014 (May), “Study on bonding phenomena of high strength aluminium alloy in nano-scale analysis,” Materials Research Innovations, Vol. 18, Issue S3, pp. S65-S71, (SCI, Impact Factor:0.83). ( NSC 101-2221-E-151-018-.)
	2013	Q.C. Hsu and A.T. Do, 2013 (December), “Minimum Porosity Formation in Pressure Die Casting by Taguchi Method,” Mathematical Problems in Engineering (SCI), Volume 2013, Article ID 920865, 9 pages, http://dx.doi.org/10.1155/2013/920865. ISSN: 1024-123X, Impact Factor:1.383
	2012	Q.C. Hsu, K.H. Kuo and P.H. Tsai, 2012 (October), “Square Tube Manufacturing by Forward Extrusion of AA7075 with Porthole Die,” Advanced Materials Research, Vol. 579, pp 92-100. (EI), ISSN: 1662-8985.
	2012	Q.C. Hsu, Y.T. Lin, D.C. Chou and C.D. Wu, 2012 (June), “Study on Nanoimprint Formability Considering the Anti-adhesion Layer for (CH2)n Polymer by Molecular Dynamics Simulation,” Current Nanoscience (SCI), Vol. 8, No. 3, pp.424-431, ISSN: 1573-4137, Impact Factor:1.776 (NSC 98-2221-E-151-015-)
	2012	Q.C. Hsu, C.L. Lin, C.D. Wu and T.H. Fang, 2012 (May), “Nanoimprint Lithography Simulation of the Polymer Chains (CH2)n with Anti-Adhesion Layer on Stamp by Molecular Dynamics Method,” Journal of Computational and Theoretical Nanoscience, Vol. 9, No. 5, pp. 662-668. (SCI), ISSN: 1546-1955, Impact Factor: 0.912. (NSC 94-2212-E-151-004 -)
	2012	Q.C. Hsu, J.J. Hsiao, T.L. Ho and C.D. Wu, 2012 (March), “Fabrication of Photonic Crystal Structures on Flexible Organic Light-Emitting Diodes by Using Nano-Imprint Technology,” Microelectronic Engineering, Vol. 91 (2012), pp.178-184. (SCI, EI), ISSN: 0167-9317, Impact Factor: 1.557. (NSC 97-2221-E-151-017 -)
	2012	C.D. Wu, T.H. Fang, P.H. Sung, Q.C. Hsu, 2012 (February) “Critical size, recovery, and mechanical property of nanoimprinted Ni–Al alloys investigation using molecular dynamics simulation,” Computational Materials Science, Volume 53, Issue 1, pp. 321-328. (SCI, EI), ISSN: 0927-0256, Impact Factor:1.460.
	2012	Q.C. Hsu, Y.Y. Cheng and B.H. Liu, 2012 (January), “Study on Bonding Properties of Copper and Aluminum in Nano Scale Using Molecular Dynamics Simulation,” Advanced Materials Research, Vols. 452-453 (2012) pp 1429-1433. (EI), ISSN: 1662-8985. (NSC 99-2221-E-151-012-)
	2012	Q.C. Hsu and Y.D. Jhan, 2012,“Development of In-Process Measurement of Dimension Error during Wire Drawing,” Lecture Notes in Electrical Engineering, Volume 142, Future Communication, Computing, Control and Management, Springer-Verlag Berlin Heidelberg, pp. 99-104, ISBN: 978-3-642-27313-1.
	2012	Q.C. Hsu and C.M. Lin, 2012, “Image-Based Inspection System for Detection of Glass Substrate’s Edge Defects,” Applied Mechanics and Materials, Vols. 121-126 (2012) pp. 3970-3976. (EI), ISSN: 1660-9336.
	2011	Q.C. Hsu and Y.C. Huang, 2011 (July) “Establish Fatigue Life Mechanism for Self Run Bushing By Engineering Analysis Methods,” Advanced Materials Research, Vols. 291-294 (2011) pp. 1165-1172. (EI), ISSN: 1022-6680.
	2011	Q.C. Hsu and C.T. Tran, 2011 (July), “Cold Roll Forming Process Design Based on the Induction of Analytical Knowledge by Considering Material and Geometry Effects,” Journal of Materials Science and Engineering A1 (2011) 210-218, Formerly part of Journal of Materials Science and Engineering, ISSN: 1934-8959. (NSC 97-2622-E-151-002-CC3)
	2011	Q.C. Hsu, K.H. Kuo, C.P. Hsu, 2011 (April), “Solid Welding Conditions for Seam and Hollow Extrusion Process of 7075 Aluminum Alloy,” Key Engineering Materials, Vol. 479, pp.62-73. (EI), ISSN: 1013-9826. (NSC 99-2221-E-151 -012 -)
	2008	Q.C. Hsu, 2008 (November), “Prototyping of Image-based Inspection Mechanisms by CAD and Virtual Reality Technology,” Materials Science Forum, Vol. 594, pp.15-21. (EI), ISSN: 0255-5476.
	2006	Q.C. Hsu, C.D. Wu and T.H. Fang, 2006, “Effects of critical width and draft angle on nanoimprint process using molecular dynamics,” Journal of the Chinese Society of Mechanical Engineers, Vol.27, No.6, pp.851-858 (SCI,EI). ISSN:0257-9731. (NSC 92-2212-E-151-013-)
	2006	J.J. Sheu, Q.C. Hsu and H.C. Chang, 2006, “Development of dimension measurement and sheet texture locating system of forming products by using image processing technology,” Journal of the Chinese Society of Mechanical Engineers, Vol. 27, No. 6, pp. 627-632 (SCI, EI). ISSN: 0257-9731.
	2006	K.M. Chang, Q.C. Hsu and W.L. Li and M.J. Jang, 2006, “Model reference adaptive control for uncertain systems with sector-like bounded nonlinear inputs,” Journal of the Chinese Society of Mechanical Engineers, Vol. 27, No. 3, pp. 353-359 (SCI, EI). ISSN: 0257-9731.
	2006	Q.C. Hsu, 2006, “Size effects on sheet metal formability of miniature parts,” Materials Science Forum, Vols.505-507, pp.721-726 (SCI, EI). (NSC 89-2212-E-151-023-) ISSN: 0255-5476.
	2005	Q.C. Hsu, C.D. Wu, K.H. Yang, R.S. Lee, 2005, “Studies on Micro-forming of CuNi and ZnAl Alloy,” Journal of the Chinese Society of Mechanical Engineers, Vol. 26, No. 5, pp. 591-596 (SCI, EI). ISSN: 0257-9731. (NSC 90-2212-E-151-002-)
	2005	Q.C. Hsu, J.J. Sheu, J.S. Yang, 2005, “Critical Safety Device for Forging Machinery by Image Processing Technology,” Journal of the Chinese Society of Mechanical Engineers, Vol. 26, No. 5, pp. 637-642 (SCI, EI). ISSN: 0257-9731.
	2005	Q.C. Hsu, C.D. Wu, and T.H. Fang, 2005, “Studies on Nanoimprint Process Parameters of Copper by Molecular Dynamics Analysis,” Computational Materials Science, Vol. 34, Issue 4, pp. 314-322 (SCI, EI). (NSC91-2212-E-151- 002-)
	2005	Q.C. Hsu, 2005, “A non-immersive virtual direct circuit experimental system for education and entertainment,” Computer Applications in Engineering Education, Vol. 13, Issue 2, pp. 146-152 (SCI, EI). ISSN: 1061-3773. (NSC 90-2515-S-151-003-)
	2004	Q.C. Hsu, C.D. Wu, and T.H. Fang, 2004, “Deformation Mechanism and Punch Taper Effects on Nanoimprint Processes by Molecular Dynamics,” Japanese Journal of Applied Physics, (Part 1), Vol. 43, No. 11A, pp. 7665-7669 (SCI, EI). (NSC 92-2212-E-151-013-)
	2004	Q.C. Hsu, Y.C. Kao, and R.J. Lai and J.J. Sheu, 2004, “How Electronic Companies can Improve Employee Abilities in the Fields of Precision and Automation,” Journal of Engineering Technology and Education, College of Engineering, National Kaohsiung University of Applied Sciences, Vol. 1, No. 1, pp. 1-18.
	2004	Q.C. Hsu, 2004, “Studies on the Punching Characteristics of Rigid Copper Clad Laminates,” Journal of National Kaohsiung University of Applied Sciences, Vol. 33, pp. 30-39.
	2003	Q.C. Hsu, 2003, “Theoretical and Experimental Study on the Hydroforming of bifurcation Tube,” Journal of Materials Processing Technology, Vol. 142, Issue 2, pp. 367-373, (SCI, EI). (NSC-89-2212-E-151-019)
2003		Q.C. Hsu, 2003, “Comparison of Different Analysis Models to Measure Plastic Strains on Sheet Metal Forming Parts by Digital Image Process,” International Journal of Machine Tools & Manufacture, Vol. 43, pp. 515-521, (SCI, EI). (NSC-88-2212-E-151-005)
2003		S.L. Chen, Q.C. Hsu, 2003, “Studies on Electric-Discharge Machining on Non-contact Seal Face Grooves,” Journal of Materials Processing Technology, Vol. 140, pp. 363-367, (SCI, EI).
2000		Q.C. Hsu and S. H. Lei, 2000, “Development and Analysis for the Large Scale Tee-Forming Process,” Journal of Materials Processing Technology, Vol. 104, pp. 265-270, (SCI, EI).
2000		Q.C. Hsu, C.F. Wu, and T.K. Sue, 2000, “Study on Forging Process Parameters for Golf Head of Titanium Alloy,” Journal of the Chinese Society of Mechanical Engineers, Vol. 21, No. 2, pp. 217-222, (EI).
2000		Q.C. Hsu, 2000, “Enhancement of Practical Manipulation Ability to Satisfy the Needs of Industrial Manufacturing Technology,” Journal of National Kaohsiung University of Applied Sciences, No. 30, pp. 65-90. (NSC-87-2516-S-151-011)
1999		R.S. Lee, Q.C. Hsu, and S.L. Su, 1999, “Development on the Parametric Computer-aided Die Design System of Cold Forging,” Journal of Materials Processing Technology, Vol. 91, pp. 80-89, (SCI, EI).
1997		Q.C. Hsu and R.S. Lee, 1997, “Cold Forging Process Design Based on the Induction of Analytical Knowledge,” Journal of Materials Processing Technology, Vol. 19, pp. 264-272, (SCI, EI).
1996		Q.C. Hsu and W.S. Lin, 1996, “Development on the Integration Interface of CAD/CAM for Closed-Die Forging,” Journal of the Chinese Society of Mechanical Engineers, Vol. 17, No. 5, pp. 509-514, (EI).
1994		R. S. Lee and Q.C. Hsu, 1994, “Image Process System for Circular-Grid Analysis in Sheet Metal Forming,” Experimental Mechanics (An International Journal), Vol. 34, No. 2, pp. 108-115, (SCI). (NSC 76-0401-E-006-05)
1993		R.S. Lee, Q.C. Hsu, and J.P. Yur, 1993, “Feature-Based Representation of Process Sequence Design in Metal Forming,” Journal of the Chinese Society of Mechanical Engineers, Vol. 14, No. 4, pp. 369-382, (EI).
1992		R. S. Lee and Q. C. Hsu, 1992, “Development of an Integrated Process Planning-Based CAE System for Cold Forging,” Journal of Engineering Manufacture, Proceedings of the Institution on Mechanical Engineers Part B., Vol. 206, pp. 215-225, (SCI, EI).
1991		Q.C. Hsu and R.S. Lee, 1991, “Geometry-Oriented Knowledge-Based System for Preliminary Process Design on Cold Forged Parts,” International Journal of Advanced Manufacturing Technology, Vol. 6, No. 1, pp. 45-61 (SCI, EI).