學術期刊發表 (Journal Publication):

  1. Shyh-Chour Huang, Thanh-Phong Dao,“Design and Analysis of a 2-DOF Compliant Mechanism for Nano Scale Positioning”, International Journal of Innovation and Applied Studies, Vol. 10 No. 1 Jan., 2015, pp. 226-236. (NSC 100-2622-E-151-018-CC3)
  2. Minh-Tai Le, Shyh-Chour Huang, “Numerical Simulation of Nanoindentation of Single Wall Carbon Nanotube Reinforced Epoxy Composite”, Applied Mechanics and Materials Vols 764-765 (2015) pp 66-70. (NSC 102-2221-E-151-022)
  3. Thanh-Phong Dao, Shyh-Chour Huang, “A Flexible Bearing with 1-DOF Translation for High-Precision Mechanism”, Applied Mechanics and Materials Vols 764-765 (2015) pp 155-159. (NSC 102-2221-E-151-022)
  4. Thanh-Phong Dao, Shyh-Chour Huang*, “Robust design for a flexible bearing with 1-DOF translation using Taguchi method and utility concept”, Journal of Mechanical Science and Technology (Korea), 29 (8) (2015) 3309~3320. (NSC 102-2221-E-151-022) (SCIE)
  5. Minh-Tai Le, Shyh-Chour Huang*,“Thermal and Mechanical Behavior of  Hybrid Polymer Nanocomposite Reinforced with Graphene Nanoplatelets,” Materials 2015, 8(8), 5526-5536; doi:10.3390/ma8085262. impact factor 2.651 (MOST 103-2221-E-151-035) (SCIE/EI)
  6. Minh-Tai Le, Shyh-Chour Huang,“Fabrication and characterization of SWCNT-reinforced Polyester nanocomposites using Tensile test and Nanoindentation techniques”,  Advanced Materials Letters 2015, Volume 6, Issue 8, Page 711-716, Year 2015.
  7. Yung-Chou Kao, Nhu-Tung Nguyen, Mau-Sheng Chen, Shyh-Chour Huang,“ A combination method of the theory and experiment in determination of cutting force coefficients in ball-end mill processes,” Journal of Computational Design and Engineering Volume 2, Issue 4, October 2015, Pages 233–247.
  8. Nhu-Tung Nguyen, Mau-Sheng Chen, Shyh-Chour Huang, Yung-Chou Kao,“An experimental method of the cutting force coefficient estimation of grey cast iron FC25,”Advanced Materials and Structural Engineering – Hu (Ed.), 2015, Pages 193–198.
  9. Minh-Tai Le, Shyh-Chour Huang*,“Mechanical Characterization of Carbon Nanotube Reinforced Polymer Nanocomposite by Nanoindentation Using FEM”, Sensors and Materials, Vol. 27, No. 8 (2015) 617–624,  2015. (SCIE/EI) (NSC 102- 2221-E-151-022).
  10. Thanh-Phong Dao, Shyh-Chour Huang*,“Design , Fabrication, and Predictive Model of a 1-DOF Translational Flexible Bearing for High Precision Mechanism”, Transactions of the Canadian Society for Mechanical Engineering, Vol. 39, No. 3, pp.419-429, 2015. (SCI). 2013 impact factor: 0.460 (NSC 102-2221-E-151-022)
  11. Quoc Manh Nguyen and Shyh-Chour Huang*, “An Investigation of the Microstructure of an Intermetallic Layer in Welding Aluminum Alloys to Steel by MIG Process”, Materials, 2015, 8, 8246–8254; doi:10.3390/ma8125444. (SCIE) impact factor: 2.651 (NSC 102-2221-E-151-022)
  12. Shyh-Chour Huang*, Minh-Tai Le,“ Optimal design of process parameters, experimental fabrication and characterisation of a novel hybrid polymer nanocomposite”, International Journal of Materials and Product Technology (Special Issue on: "Synthesis, Characterisation and Applications of Nanocomposite Materials),  pp.362-380,  Int. J. Materials and Product Technology, Vol. 52, Nos. 3/4, 2016. (MOST 103-2221-E-151-035) (SCIE, EI) impact factor: 0.26.
  13. Minh-Tai Le, Shyh-Chour Huang*,“Effect of nano-fillers on the strength reinforcement of novel hybrid polymer nanocomposites”, Materials and Manufacturing Processes, Volume 31, Issue 8, pages 1066-1072, June 2016, (SCIE).
  14. Thanh-Phong Dao, Shyh-Chour Huang*, , "Design and Analysis of a Compliant Micro-Positioning Platform with Embedded Strain Gauges and Viscoelastic Damper" , Microsystem Technologies, published on line: 27 June, 2016. (SCIE). (MOST 104-2221-E-151-010) DOI: 10.1007/s00542-016-3048-3
  15. Shyh-Chour Huang, Thanh-Phong Dao*,“Multi-objective optimal design of a 2-dof flexure-based mechanism using hybrid approach of grey-Taguchi coupled response surface methodology and entropy measurement”, Arabian Journal for Science and Engineering, December 2016, Volume 41, Issue 12, pp 5215–5231, 2016. (SCIE). (MOST 104-2221-E-151-010) DOI 10.1007/s13369-016-2242-z. (published on line: 28 June, 2016)
  16. Shyh-Chour Huang Thanh-Phong Dao*, “Design and Computational Optimization of a Flexure-Based XY Positioning Platform using FEA-based Response Surface Methodology”, International Journal of Precision Engineering and Manufacturing, Vol. 17, No. 8, pp. 1035-1048, August, 2016. (SCIE). (MOST 104-2221-E-151-010)
  17. Thanh-Phong Dao, Shyh-Chour Huang*,“A Compact Quasi-Zero Stiffness Vibration Isolator Using Flexure-Based Spring Mechanisms Capable of Tunable Stiffness,” International Journal of Mechanical, Aerospace, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering Vol:10, No:8, 2016. (MOST 104-2221-E-151-010)
  18. Te-Ching Hsiao, Tso-Sheng Hsieh, Yi-Chian Chen, Shyh-Chour Huang, Chia-Chin Chiang*,“ Metal-coated fiber Bragg grating for dynamic temperature sensor,” Optik - International Journal for Light and Electron Optics, Volume 127, Issue 22, 2016, Pages 10740–10745. (SCI). (MOST 103-2221-E-151-009-MY3)
  19. Te-Ching Hsiao, Hao-Yuan Chang and Shyh-Chour Huang,”Fatigue Life Analysis of Cantilever Probe on Wafer Test”, MATEC Web of Conferences 71 , 04007, 2016. (EI)
  20.  Thanh-Phong Dao*, Shyh-Chour Huang, ”Compliant thin-walled joint based on zygoptera nonlinear geometry”, Journal of Mechanical Science and Technology (Korea), 31 (3) (2017) 1293~1303. (MOST 105-2221-E-151-016) (SCIE)
  21. Thanh-Phong Dao*, Shyh-Chour Huang, ”Optimization of a two degrees of freedom compliant mechanism using Taguchi method‑based grey relational analysis”, Microsyst Technol, DOI 10.1007/s00542-017-3292-1. (Vietnam National Foundation for Science and Technology Development (NAFOSTED) under Grant Number 107.01-2016.20.) (SCIE)
  22. Thanh-Phong Dao*, Shyh-Chour Huang, Pham Toan Thang, ” Hybrid Taguchi-cuckoo search algorithm for optimization of a compliant focus positioning platform”, Applied Soft Computing, Volume 57, August 2017, Pages 526–538. (Vietnam National Foundation forScience and Technology Development (NAFOSTED) under grantnumber 107.01-2016.20References) (SCIE)

​

會議發表 (Proceeding and Conference):

  1. N. T. Nguyen , Y.C. Kao, S. C. Huang, M. S. Chen,“An experimental method of the cutting force coefficient estimation of grey cast iron FC25,”International Conference on Advanced Materials and Engineering Structural Technology (ICAMMSE 2015),  paper ID: CH235, Jan. 25-26, 2015, Changzhou, China.
  2. Y.C. Kao, N. T. Nguyen, M. S. Chen,S. C. Huang,“A combination method of the theory and experiment in determination of cutting force coefficients in ball-end mill processes,”The 4th International Symposium of Computational Numerical Control Maching (CNCM 2015),  June, 3-5, 2015, Hong Kong, China.
  3. 程揚正，黃世疇，”諧波齒輪船動之柔輪最佳化分析”， 2015精密機械與製造科技研討會，屏東墾丁福華大飯店，2015年5月22日~24日。(MOST 103-2221-E-151-035)
  4. Shyh-Chour Huang, Minh-Tai Le,“Reinforcement of Strength of Epoxy/Polyester blend composite using Graphene Nanoplatelets,”2015 International Conference on Applied System Innovation (ICASI2015), pp.24, paper No. 1319, May, 22-26, 2015, Osaka, Japan. (Best Conference Paper Award)
  5. Thanh-Phong Dao, Shyh-Chour Huang,“Design and characteristics of a novel compliant planar spring capable of a positive stiffness for a compact vibration isolator,” 4th Vietnam National Scientific Conference on Mechanical Engineering (VCME) Ho Chi Minh City, Vietnam, October 9-10, 2015.
  6. 黃羿鳳，黃世疇，蕭德慶，龔聖評，”全膝關節置換的最佳形狀磨損分析”， 2015台灣生物力學年度學術研討會暨科技部成果發表會，義守大學，2015年10月16日。(MOST 104-2221-E-151-010)
  7.  Quoc Manh Nguyen, Shyh-Chour Huang*,“An investigation into the MIG welding A5052 alloy to SS400 steel,” International Conference on Innovation, Communication and Engineering 2015 (ICICE2015), October 24 - 28, 2015, Xiangtan, Hunan, P.R. China
  8. Minh-Tai Le, Shyh-Chour Huang,“Mechanical Properties and Microstructure of   Hybrid Thermoset Nanocomposite Reinforced with Multi-walled Carbon Nanotubes ,” The International Multi-Conference on Engineering and Technology Innovation 2015 (IMETI2015), Kaohsiung, Taiwan, October 30-Nov. 3, 2015. (submit 2015/7/31)
  9.  Shyh-Chour Huang, Wan-Chen Hsu,“Strategies for promoting learning satisfaction among international students: Perspectives from National Kaohsiung University of Applied Sciences (KUAS),” 11th QS Asia Pacific Professional Leaders in Education Conference and Exhibition (QS-Apple 2015), November 25 - 27 2015, Melbourne, Australia.
  10. Usman, Shyh-Chour Huang*,“Finite Element Analysis of Total Knee Joint Replacement during Deep Double Leg Descending Flexion,” 2015 International Conference on Computing and Precision Engineering (ICCPE2015), Nov. 27-30, 2015, Sun Moon Lake, Nantou, Taiwan.
  11. 龔聖評，黃世疇，蕭德慶，”治療PAUWELS II 型股骨頸骨折之最佳骨螺釘配置分析”，2015 生物醫學工程科技研討會暨科技部醫學工程學門成果發表會，臺灣大學，Nov. 13-14，2015， 論文編號：PD-03。(MOST 104-2221-E-151-010)
  12. 黃筱雯，謝謦羽，黃世疇，蕭德慶，蔡明章，”磁力鐵屑收集器的創新設計與分析”， 中國機械工程學會第32屆全國學術研討會，高雄應用科技大學，Dec. 11-12，2015， 論文編號：0110。
  13. 洪朗瑋，蕭德慶，黃世疇，葉展宏，”應用田口方法於銑削加工表面粗度之分析驗證”， 中國機械工程學會第32屆全國學術研討會，高雄應用科技大學，Dec. 11-12，2015， 論文編號：0317。(MOST 104-2221-E-151-010)
  14. Shyh-Chour Huang, Wan-Chen Hsu,“Strategies for promoting learning satisfaction among international students: Perspectives from National Kaohsiung University of Applied Sciences (KUAS),” 11th QS Asia Pacific Professional Leaders in Education Conference and Exhibition (QS-Apple 2015), November 25 - 27 2015, Melbourne, Australia.
  15. Shyh-Chour Huang, Wan-Chen Hsu,“Quality Assurance in Taiwan’s Higher Education: Strategies to provide guidance services for international students,” 6th QS Middle East and Africa Professional Leaders in Education Conference and Exhibition (QS-MAPLE) May 10-12, 2016, United Arab Emirates University (UAEU) Campus, Al Ain, United Arab Emirates.
  16. Quoc Manh Nguyen, Shyh-Chour Huang, Van Nhat Nguyen, Hong Thanh Nguyen,“ Dissimilar metal inert gas (MIG) welding between A5052 alloys and SS400 steel,” 2016 International Conference on Applied System Innovation (ICASI 2016), Paper No.:0027, May 28- JUNE 1, 2016, Okinawa, Japan. (MOST 104-2221-E-151-010)
  17. Quoc Manh Nguyen, Shyh-Chour Huang, Van Nhat Nguyen, Van Dat Vu,“ Dissimilar welding of SUS 304 stainless steel to A6061 alloy by tungsten inert gas,” 2016 International Conference on Applied System Innovation (ICASI 2016), Paper No.: 0089, May 28- JUNE 1, 2016, Okinawa, Japan.(MOST 104-2221-E-151-010)
  18. Te-Ching Hsiao, Shyh-Chour Huang,“ Finite Element Analysis of The Thickness for Staggered Dynamic Compression Bone Plate,” 2016 International Conference on Applied System Innovation (ICASI 2016), Paper No.: 0090, May 28- JUNE 1, 2016, Okinawa, Japan. (MOST 104-2221-E-151-010)
  19. Yi-Feng Huang, Shyh-Chour Huang, Te-Ching Hsiao,“ Optimal Shape Wear Analysis of Total Knee Replacement,” 2016 International Conference on Applied System Innovation (ICASI 2016), Paper No.:0287, May 28- JUNE 1, 2016, Okinawa, Japan. (MOST 104-2221-E-151-010)
  20. Thanh-Phong Dao, Shyh-Chour Huang,“A Compact Quasi-Zero Stiffness Vibration Isolator Using Flexure-Based Spring Mechanisms Capable of Tunable Stiffness,” 18th International conference on applied mechanics, materials science and engineering (ICAMMSE 2016), pp.3505-3514, London, United Kingdom August 25 - 26, 2016. (MOST 104-2221-E-151-010)
  21. 黃世疇，貴賓演講 (Keynote speaker)，”柔順機構最佳化設計與應用”，2016航空機械工程學術研討會， 2016年 10月7日，高雄市，岡山，空軍軍官學校。
  22. 林暐傑，黃世疇，”諧波齒輪減速機構之柔輪變形量探討”， 2016航空機械工程學術研討會，論文編號：B4，2016年 10月7日，高雄市，岡山，空軍軍官學校。
  23. 黃柏璋，黃世疇，”應用KINECT骨骼辨識技術及人體穩定限度於預防跌倒姿態之研究”， 2016航空機械工程學術研討會，論文編號：C4，2016年 10月7日，高雄市，岡山，空軍軍官學校。
  24. 胡嘉丞，黃世疇，”骨質疏鬆之股骨幹骨折最佳化螺釘設計”， 2016航空機械工程學術研討會，論文編號：D2，2016年 10月7日，高雄市，岡山，空軍軍官學校。
  25. 劉昱麟，黃世疇，”壓電片最佳化設計與分析”， 2016航空機械工程學術研討會，論文編號：D5，2016年 10月7日，高雄市，岡山，空軍軍官學校。
  26. Thanh-Phong Dao, Shyh-Chour Huang,“Design and Analysis of a Compliant Positioning Platform with Embedded Strain Gauge and Viscoelastic Damper,” The Fifth International Multi-Conference on Engineering and Technology Innovation 2016 (IMETI2016), paper no. J6005, Taichung, Taiwan, Oct. 28 - Nov. 01, 2016.
  27. Usman, Shyh-Chour Huang, “The effect of conformity on the displacement, indentation time, and contact stress during impact load in total knee replacement,” The Fifth International Multi-Conference on Engineering and Technology Innovation 2016 (IMETI2016), paper no. J6036, Taichung, Taiwan, Oct. 28 - Nov. 01, 2016.
  28. Usman, Shyh-Chour Huang, “The influence of medial-lateral contact pair conformity on contact stresses in total knee replacement,” The Fifth International Multi-Conference on Engineering and Technology Innovation 2016 (IMETI2016), paper no. J6037, Taichung, Taiwan, Oct. 28 - Nov. 01, 2016. 
  29. Te-Ching Hsiao, Shyh-Chour Huang, Hao-Yuan Chang, “SB6010- design optimization of vertical needle geometry for bump wafer – level probing,” The Fifth International Multi-Conference on Engineering and Technology Innovation 2016 (IMETI2016), paper no. SB6010, Taichung, Taiwan, Oct. 28 - Nov. 01, 2016. 
  30. Te-Ching Hsiao, Shyh-Chour Huang, " Fatigue Life Analysis of Cantilever Probe on Wafer Test". (ICCPE 2015) MATEC Web of Conferences 71, 04007 (2016)
  31. 黃筱雯，黃世疇，” 鎖定加壓骨板之最佳化設計”，2016台灣生物力學會年度學術研討會，2016年 10月29日，台中市，中國醫藥大學。(海報發表，優等)
  32. 龔聖評，黃世疇，蕭德慶，”股骨頸骨折治療之空心螺釘最佳化設計”，2016台灣生物力學學會年度學術研討會，2016年 10月29日，台中市，中國醫藥大學。
  33. 黃世疇，” 新型單自由度撓性機構驅動之微壓痕裝置的最佳化設計”，自動化學門104年度計畫成果發表會，C1-15，2016年 11月4-5日，台中市，中興大學。(MOST 104-2221-E-151-010)
  34. 謝謦羽，黃世疇，蕭德慶,"鎖定骨板有限元素分析及最佳化設計",中國醫藥大學,交通大學, Nov. 25-26, 2016;論文編號1166。
  35. 蕭德慶，黃筱雯，黃世疇，張郁萱，” 厚度與骨折間隙對動力加壓骨板治療股骨幹骨折之有限元素分析”，中國機械工程學會第33屆全國學術研討會(台灣大學)，新竹工業技術研究院，Dec.3-4, 2016，論文編號：1099。(MOST 105-2221-E-151-016)

​

    高雄應用科技大學

1.黃世疇, "組合式機車安全帽的數值分析", 國立高雄科學技術學院研究報告(NKIT-86-ME-005), 1998.

2.黃世疇, "機車安全帽之動態分析", 國立高雄科學技術學院研究報告(NKIT-87-ME-012), 1999.
​
3.黃世疇, "人體振動分析",國立高雄科學技術學院報告, (NKIT-87-ME-012), 2000.


​

    行政院國家科學委員會​

  1. 黃世疇, "多體系統動力學的應用研究－汽車碰撞中人體動力分析", 國科會(NSC 83-0420-E-151- 001),1994年9月30日.
  2. 黃世疇, "人類頭頸系統碰撞傷害之數值模擬", 國科會(NSC 85-2213-E-151-002),1997年1月31日.
  3. 黃世疇, "因應產業機械需求強化工專機械技術實作能力之研究-機械系統之工程分析技術(I)", 國科會(NSC85-2516-S-151-010),1997年9月30日.
  4. 黃世疇, "汽車後撞中人體動態反應分析", 國科會(NSC 86-2213-E-151-005),1997年9月30日.
  5. 黃世疇, "因應產業機械需求強化工專機械技術實作能力之研究-機械系統之工程分析技術(II) ", 國科會(NSC87-2516-S-151-    013),1998年8月31日.
  6. 黃世疇, "捷運車輛的動態模擬", 國科會(NSC 88-2212-E151-003), 1999年8月1日.
  7. 黃世疇, "利用模態實驗方式決定軌道特性動態", 國科會(NSC 89-2212-E-151-020),2000年8月1日.
  8.  黃世疇, "人體振動數學模型研究", 國科會(NSC 89-2213-E-151-024),2001年8月1日.
  9. 黃世疇, "鞭甩負載下人體頭頸系統之動態分析", 國科會(NSC 90-2213-E-151-005),2002年8月1日.
  10. 黃世疇, "因應中小企業需求強化電腦輔助工程技術應用能力之研究",國科會(NSC NSC 91－ 2622－E－151－002－CC3),2003年7月1日. 　
  11. ​黃世疇, "捷運車乘車品質之動態分析",國科會(NSC 91-2212-E-151-003), 2003年10月1日.