1

Yu, J. , Lotfi, S., Ishii, K., and Trageser, A., (1993),  "Process Selection for the Design of Aluminum Components."  Advances in Engineering Software, 18(3), pp. 177-186.

2

Yu, J. , Krizan, S., and Ishii, K. (1993), "Computer Aided Design for Manufacturing Process Selection." Journal of Intelligent Manufacturing, Vol. 4, pp. 199-208.

3

Yu, J.  and Ishii, K. (1998), "Design for Robustness Based on Manufacturing Variation Patterns," Journal of Mechanical Design. Vol. 120, No.2, pp. 196-202.

4

Yu, J.  and Lan, C. (2001), “System Modeling of Microaccelerometer Using Piezoelectric Thin Films”, Sensors and Actuators A 88, 178-186  (NSC 88-2216-E-011-013)

5

Yu, J.  and Lai, F.H. (2001), “Design And Fabrication Of Microaccelerometers Using Piezoelectric Thin Films”, Ferroelectrics, Vol.263, pp.101-106. (NSC89-2216-E011-027)

6

Yu, J. , Chen, X., Hung, T.R. and Thibault, F. (2004), “Optimization of Extrusion Blow Molding Processes Using Soft Computing and Taguchi's Method”, Journal of Intelligent Manufacturing. 15, pp.625-634 (NSC89-2212-E155-019)

7

Yu, J.  and Li, Y.M. (2006) “Structure Representation for Concurrent Analysis of Product Assembly and Disassembly”, International Journal of Expert Systems with Applications. Vol. 31, Issue 4, pp.705-714. (SCI/EI)

8

Yu, J. and Lin, H.Y. (2007) “The Design of a FPW Resonator using the Composite Membrane of PZT Layer and SiNx for Liquid Sensing”, Tamkang Journal of Science and Engineering, Vol. 10, No 2, pp. 163-166.(EI)

9

Yu, J. and Lin, H.Y. (2008) “Liquid Density Sensing Using Resonant Flexural Plate Wave Devices with Sol-Gel PZT Thin Films”, Microsystem Technologies. Vol. 14, No. 7, pp. 1073-1079. (SCI/EI)

10

Yu, J., Wu, J., Yeh, T., and Chou, C. -C. (2009)“Compatibility of Material Processing and Fabrication of PZT Based Devices”, Ferroelectrics, 383:1,127-132. (SCI/EI)

11

Yu, J., Lee, C., and Chang, C. (2009)“Design and System Modeling of a Tri-Axial Microaccelerometer Using Piezoelectric Thin Films”, Ferroelectrics, 385:1,69 – 74. (SCI/E)

12

Yeh, T., Shen, J., Yu, J., and Chou, C. -C. (2009)“Chemical Reactions during Wet-Etching Process of LSMO/PZT/LSMO-Structured Device Fabrication”, Ferroelectrics,  380:1,97 – 101. (SCI/E)

13

Huang, M.-S., Li, C.-J., Yu, J., Huang, Y.-M. and Hsieh, L.-C. (2009), “Robust parameter design of micro-injection molded gears using a LIGA-like fabricated mold insert”, Journal of Materials Processing Technology, Vol. 209, Issues 15-16, pp. 5690-5701. (SCI/E)

14

Yu, J.and Hsu, P.-K. (2009) “Integration of Stamper Fabrication and Design Optimization of LCD Light Guides Using Silicon-based Microfeatures”, Microsystem Technologies, Vol. 16, Issue 7 (2010), pp. 1193-1200.(SCI/EI)

15

Yu, J.and Juang, J.-Y. (2010) “Design Optimization of Extrusion Blow Molded Parts Using prediction reliability Guided search of Evolving Network Modeling”, J. of Appylied Polymer Science, Vol. 117, Issue 1, pp.222-234. (SCI/EI)

16

Huang, M.-S., Yu, J., Lin, Y.-C.(2010) “Effect of Rapid Mold Surface Inducting Heating on the Replication Ability of Microinjection Molding Light-guided Plates with V-grooved Microfeatures”, J. of Appylied Polymer Science, Vol. 118, Issue 5, December 2010, pp. 3058-3065. (SCI/EI)

17

Yu, J., Lee, C., Chang, C., and Kuo, W. (2011) “Modeling Analysis of a Triaxial Microaccelerometer with Piezoelectric Thin-Film Sensing Using Energy Method”, Microsystem Technologies, Vol. 17, No. 4, pp. 483–493. (SCI/EI)

Yu, J., Chen, Z.-Y., and Kao, B.-D. (2014) “Optical Design and Optimization of Planar Curved LED End-lit Light Bar”, Applied Optics, Vol. 53, Issue 29, pp. H67-H75 (SCI/EI)

19

Yu, J., Cheng, M.-T., and Yao, W.-S. (2016, Oct). "Design and Analysis of Axial Flux Permanent Magnet Motor with Variable Windings.," Journal of the Chinese Society of Mechanical Engineers, Vol. 37, Issue 5, pp. 497 - 507 (SCI/EI)

20

Yu, J.C. and Suprayitno (2017),"Evolutionary Reliable Regional Kriging Surrogate and Soft Outer Array for Robust Engineering Optimization," in IEEE Access, vol. 5, pp. 16520-16531, https://doi.org/10.1109/ACCESS.2017.2720631. (SCI/EI)

21

Yu, J.C., Chang, C.-K., and Suprayitno (2017), "Robust design optimization via surrogate network model and soft outer array design," International Journal of Production Research, vol. 56:4, 1533-1547, https://doi.org/10.1080/00207543.2017.1356484. (SCI/EI)

22

Suprayitno, Yang. C.Y., Yu, J.C., Lin, B.T. (2018)“Optimum Design of Microridge Deep Drawing Punch Using Regional Kriging Assisted Fuzzy Multiobjective Evolutionary Algorithm”, IEEE Access, vol. 6, Issue 1, pp. 63905-63914, https://doi.org/10.1109/ACCESS.2018.2878047 (SCI/EI)

23

Suprayitno and Yu, J.C.(2019), "Evolutionary reliable regional Kriging surrogate for expensive optimization," Engineering Optimization, 51:2, 247-264, DOI:10.1080/0305215X.2018.1446084 (SCI/EI)

24

Yu, J.C., Suprayitno, and Yang, Li-Wei (2019) “Optical Design Optimization of High Contrast Light Guide Plate for Front Light Unit”, Microsystem Technologies, 25:2135–2144, https://doi.org/10.1007/s00542-018-04287-x. (SCI/EI)

25

Yao, W.-S., Cheng, M.-T., and Yu, J.C. (2020/11) “Novel Design of a Coreless Axial-Flux Permanent-Magnet Generator with three-layer winding coil for Small Wind Turbines”, IET Renewable Power Generation, vol. 14, no. 15, pp. 2924-2932. (SCI/EI)

26

Suprayitno, Yu, J., Aminnudin, and Wulandari, R (2020) “Airfoil aerodynamics optimization under uncertain operating conditions,” Journal of Physics Conference Series, 2020 1446:012014, DOI: 10.1088/1742-6596/1446/1/012014. (EI)