|
|
|
|
01
|
Yu, J.（余志成）,
and Ishii, K. (1998), "Design Optimization for Robustness Using Quadrature
Factorial Models" Engineering Optimization. Vol. 30, pp.203-225.
(SCI/EI)
|
|
|
|
|
02
|
Yu, J.（余志成）
and Ishii, K. (1998), "Design for Robustness Based on Manufacturing
Variation Patterns", Journal of Mechanical Design. Vol. 120, No.2, pp.
196-202. (SCI/EI)
|
|
|
|
|
03
|
Yu, J.（余志成）,
Ishii, K., and Sundaresan, S., (1993) "Robust Design Optimization Using
factorial experiments and Simulation." Proceedings of the JSME/ASME Joint
Engineering Design Workshop, Tokyo, Japan.
|
|
|
|
|
04
|
Yu, J.（余志成）
and Ishii, K., (1993), "A Robust Optimization Method for Systems with
Significant Nonlinear Effects." Advances in Design Automation, DE-Vol.
65-1, ASME, pp.371- 378. (EI) |
|
|
|
|
05
|
Yu, J.（余志成）
and Ishii, K., (1994), "Robust Design by Matching the Design with
Manufacturing Variation Patterns." Advances in Design Automation, DE-Vol.
69-2, ASME, pp. 7-14. (EI) |
|
|
|
|
06
|
Yu, J.（余志成）,
Chen, X., Hung, T.R. and Thibault, F. (2003),
“Optimization
of Extrusion Blow Molding Processes Using Soft Computing and Taguchi's
Method”,
Paper accepted for the Journal of Intelligent Manufacturing.15,
pp.625-634(NSC89-2212-E115-019)
(SCI/EI)
|
|
|
|
|
07
|
Yu, J., (1995), "Design
Optimization for Robustness Using Quadrature Factorial Models",
中國機械工程學會第十二屆全國學術研討會設計製造組論文集,
pp. 711-719.
|
|
|
|
|
08
|
Yu, J., (1996), "Design
for Robustness Using Manufacturing Variation Patterns",
中國機械工程學會第十三屆全國學術研討會設計組論文集,
pp.398-405. |
|
|
|
|
09
|
張政雄、余志成
(1997), “參數變異模態對及極值合理性之影響與最佳化策略“,
中國機械工程學會第十四屆全國學術研討會固力與設計組論文集
, pp. 670-677.
|
|
|
|
|
10
|
何文中、余志成 (1998), “參數變異模態應用於穩健最佳化設計“，中國機械工程學會第十五屆全國學術研討會,
固力與設計組論文集,
pp. 953-961.
|
|
|
|
|
11
|
Yu, J. and Lan, C. (1999),
“System
Modeling and Robust Design of Microaccelerometer Using Piezoelectric Thin
Film”,
Proceedings of the 1999 IEEE International Conference on Multisensor Fusion
and Integration for Intelligent Systems, Taipei, ROC., pp. 99-104. (NSC
88-2216-E-011-013)
(EI)
|
|
|
|
|
12
|
龍雲漢、余志成
(1999), “傳動軸件熱處理變形極小化之穩健化幾何設計“,
中國機械工程學會第十六屆全國學術研討會,
固力與設計組論文集,pp.
903-910
|
|
|
|
|
13
|
余志成、藍慶斌
(2000),
“應用田口方法於壓電薄膜加速度微感測器之結構設計“,
第四屆亞太品質工程研討會論文集,
pp.125-132 (NSC 88-2216-E-011-013)
|
|
|
|
|
14
|
賴富信、余志成
(2000),”壓電薄膜微加速度計之設計系統模擬與頻率響應穩健化”,中國機械工程學會第十七屆全國學術研討會，新興工程技術論文集，Dec.
8-9, 2000, 高雄第一科技大學(NSC
89-2210-E-011-027) |
|
|
|
|
15
|
Yu, J.
（余志成）
and Ho, W. (2000), “Modified
Sequential Programming For Feasibility Robustness Of Constrained Design
Optimization”
, Proceedings of DETC'00 ASME 2000 Design Engineering Technical Conferences
and Computers and Information in Engineering Conference, DETC2000/DAC-14531,
Baltimore, Maryland, September 10-13, 2000 (NSC
86-2212-E-011-011) |
|
|
|
|
16
|
陳相弦、洪宗仁、余志成
(2001) “應用柔性演算法於吹塑成型製程最佳化”，第十二屆全國自動化科技研討會，雲林虎尾技術學院，民國九十年五月。(NSC89-2212-E155-019) |
|
|
|
|
17
|
Yu, J.（余志成）,
Chen, X., and Hung, T.R., (2001)
“Optimization
of Extrusion Blow Molding Using Soft Computing and Taguchi Method”,
The Sixth International Conference on Computer Supported Cooperative Work in
Design, July 12-15, 2001, London, Ontario, Canada. (NSC89-2212-E155-019) |
|
|
|
|
18
|
陳相弦、洪宗仁、余志成,
(2001), “應用柔性演算法於穏健最佳化設計”
中國機械工程學會第十八屆全國學術研討會，電腦輔助設計論文集，2001/12/7-8，台灣科技大學.
(NSC89-2212-E155-019) |
|
|
|
|
19 |
F. Thibault, P.
Debergue, M. Milliste, W. Shen, H. H. Ghenniwa, Y. Hsu, T. Liu, J. Yu
（余志成）and
T. Hung, (2002), “Development
of a MDO Methodology for Automotive Interior Blow Moulded Parts”,
Proceedings of the 5th Anniversary Event of NSC-NRC Collaborative
Research Program Symposium, pp. 46-57, Taipei, Taiwan, June 24-25, 2002.
(NSC90-2212-E011-022) |
|
|
|
|
20 |
J. Yu（余志成）,
T.R. Hung, J.Y. Juang, and F. Thibault, (2002)
“Design
Optimization Using Soft Computing Techniques For Extrusion Blow Molding
Processes
“,
The Proceedings of the 2002 NRC-NSC Canada-Taiwan Joint Workshop on
Advanced Manufacturing Technology, pp. 73-84, London, Canada, 23-24
Sept., 2002. (NSC90-2212-E011-022) |
|
|
|
|
21 |
W. Shen, Y. Wang,
Y. Ma, Y. Li, H. H. Ghenniwa, F. Thibault, Y. Hsu, and J. Yu（余志成）,
(2002) “A
Distributed MDO Environment Based on Web and Agents“,
The Proceedings of the 2002 NRC-NSC Canada-Taiwan Joint Workshop on
Advanced Manufacturing Technology, pp. 85-94, London, Canada, 23-24
Sept., 2002. |
|
|
|
|
22 |
J. Yu（余志成）and
T.R Hung (2002) “Design
Optimization of Extrusion Blow Molded Parts Using Fuzzy Neural-Taguchi
Method and Genetic Algorithm”,
Pro. of ASME Design Automation Conference 2002, Sept., 2002,
Montreal, Canada. (NSC90-2212-E011-022)
(EI)
|
|
|
|
|
23 |
洪宗仁、余志成(2002)
“應用柔性演算法於吹塑成型件之製程與設計最佳化”
中國機械工程學會第十九屆全國學術研討會，2002/11/29-30，虎尾技術學院.
(NSC 90-2212-E-011-022)
|
|
|
|
|
24 |
莊志勇、余志成,(2004),
“應用模糊局部類神經網路於演化型最佳化方法之研究”
中華民國第十二屆模糊理論及其應用會議，
2004/11/12-13，國立宜蘭大學 |
|
|
|
|
25 |
莊志勇、余志成,(2004)
,“以模糊類神經基因演算法進行設計最佳化”
中國機械工程學會第二十一屆全國學術研討會，固力與設計論文集，pp.3021-3026,
2004/11/26-27，國立中山大學 |
|
|
|
|
26 |
余志成、曾譽龍,(2005),
“演化型類神經網路信賴空間於稀少訓練樣本的設計最佳化”，中華民國第十三屆模糊理論及其應用會議，
2005/11，國立高雄第一科技大學。 |
|
|
|
|
27 |
曾譽龍、余志成(2006)“演化型局部類神經網路於穏健最佳化設計”，第十四屆模糊理論及其應用會議，2006/12/14-15，義守大學，高雄。 |
|
|
|
|
28 |
余志成、曾譽龍,(2006),“演化型局部類神經網路結合遺傳演算法於工程設計最佳化”
第十一屆人工智慧與應用研討會，2006/12/15-16，國立高雄應用科技大學，高雄。 |
|
|
|
|
29 |
J. Yu
（余志成）and
Y.L. Tseng (2007)
“Evolutionary
Engineering Optimization Using Recursive Regional Neural Network and Genetic
Algorithm”
Proceedings of the 2nd. International Conference on Innovative
Computing Information and Control, Sept. 5 - 7, 2007, Kumamoto, Japan |
| |
|
|
30 |
鄭明得、余志成 (2009),
薄型大電流電感器鐵芯粉末調配之穩健最佳化設計
”，2009年中國機械工程學會第二十六屆全國學術研討會，2009/11/20~21，台南成功大學。
|
|
|
|
|
31 |
Yu, J.（余志成）and
Juang, J.-Y. (2010)
Design Optimization of Extrusion Blow Molded Parts Using prediction reliability
Guided search of Evolving Network Modeling, J. of Appylied Polymer Science, Vol. 117, Issue 1, pp.222-234.
(SCIEI, I.F.:1.187, Polymer Science Rank Factor: 34/73
|
| |
|
|
32 |
余志成、黃明賢、梁智富、林穎志、古洪華 (2009),
應用智慧型最佳化於導光板微射出成型之轉寫控制
”，中華民國第十七屆模糊理論及其應用會議, 2009/12/18~19，高雄大學。
|
| |
|
|
33 |
Suprayitno and Jyh-Cheng Yu (2014),
“Surrogate Assisted Engineering Optimization Using Prediction Error as Penalty Design Fitness
”，全國精密製造研討會，國立高雄第一科技大學，台灣。
|
| |
|
|
34 |
Jyh-Cheng Yu and Zhi-Fu Liang (2014),
Evolutionary Network Modeling for Efficient Engineering Optimization
” Proc. of IEEE World Congress of Computational Intelligence (WCCI) 2014, Beijing, China.
|
| |
|
|
35 |
Jyh-Cheng Yu and Chaio-Kai Chang (2015),
Robust Design Optimization via Integrated Experimental Design and Surrogate Network
” The 4th International Conference on Advanced Manufacturing Technology Sept, 2015, Johor Bahru, Malaysia.
|
| |
|
|
36 |
Suprayitno and Jyh-Cheng Yu (2015),
Evolutionary Algorithm Using Progressive Kriging Model and Dynamic Reliable Region for Expensive Optimization Problems
” The 4th International Conference on Advanced Manufacturing Technology Sept, 2015, Johor Bahru, Malaysia.
|
| |
|
|
37 |
Suprayitno and Jyh-Cheng Yu (2016),
Evolutionary Algorithm Using Progressive Kriging Model and Dynamic Reliable Region for Expensive Optimization Problems.
” IEEE International Conference on Systems, Man, and Cybernetics (SMC) (WCCI) Oct., 2016, Budapest, Hungary.
|
| |
|
|
38 |
Yu, J.C. and Suprayitno (2017),"
Evolutionary Reliable Regional Kriging Surrogate and Soft Outer Array for Robust Engineering Optimization
," in IEEE Access, vol. 5, pp. 16520-16531, https://doi.org/10.1109/ACCESS.2017.2720631.
|
| |
|
|
39 |
Yu, J.C., Chang, C.-K., and Suprayitno (2017), "
Robust design optimization via surrogate network model and soft outer array design,"
International Journal of Production Research, vol. 56:4, 1533-1547, https://doi.org/10.1080/00207543.2017.1356484.
|
| |
|
|
40 |
Suprayitno, Yang. C.Y., Yu, J.C., Lin, B.T. (2018) "
Optimum Design of Microridge Deep Drawing Punch Using Regional Kriging Assisted Fuzzy Multiobjective Evolutionary Algorithm,"
IEEE Access,vol. 6, Issue 1, pp. 63905-63914, https://doi.org/10.1109/ACCESS.2018.2878047
|
| |
|
|
41 |
Suprayitno and Yu, J.C.(2019) "
Evolutionary reliable regional Kriging surrogate for expensive optimization,"
Engineering Optimization, 51:2, 247-264, DOI:10.1080/0305215X.2018.1446084
|
|
|
|
|